Omron

Power Relay, 3PDT, 24 VDC, 10 A, MK-S Series, Socket, Non Latching
Switch a DC load of 220 VDC, 10 A (resistive load).

Models for AC Loads can switch 250 VAC, 15 A (resistive load).

• Item Code: MKS3PDC24
• Delivery Time: Ready Stock
• Packaging Details: 10PC BOX PACKING

Switch a DC load of 220 VDC, 10 A (resistive load).

Models for AC Loads can switch 250 VAC, 15 A (resistive load).

• 0.005mm Minimum sensing object diameter
• 10 or 25mm minimum bending radius
• New flat model allows space savings and simple installation
• -40 to 70°C Ambient temperature range

• M12, short barrel, shielded sensor
• Cylindrical, metric threaded, brass housing
• Sensing distance is 4mm
• PNP output
• Operating mode is normally open (NO)
• Power supply voltage range from 10VDC to 30VDC, operating temperature range from -25°C to 70°C
• Yellow LED 360 degree indication
• Insulation resistance is 50Mohm min at 500VDC, dielectric strength is 1000VAC at 50/60Hz
• Approved by IEC60529, EN60947-5-2 standards, water resistance IP67

• Ultra-slim housing measuring 29 (W) x 10 (D) x 32 (H) mm.

• All Output Relays provide a long endurance (1,000,000 operations at 5 A), while all Input Relays provide microswitching power (100 μA at 1 V).

Pin configuration compatible with MY Power Relay.

Standard multiple operating modes and multiple time ranges.

Conforms to EN 61812-1 and IEC 60664-1 for Low Voltage, and EMC Directives.

• M12, short barrel, shielded sensor
• Cylindrical, metric threaded, brass housing
• Sensing distance is 4mm
• PNP output
• Operating mode is normally open (NO)
• Power supply voltage range from 10VDC to 30VDC, operating temperature range from -25°C to 70°C
• Yellow LED 360 degree indication
• Insulation resistance is 50Mohm min at 500VDC, dielectric strength is 1000VAC at 50/60Hz
• Approved by IEC60529, EN60947-5-2 standards, water resistance IP67

Realized about 25% lower profile than conventional products, contributing to further miniaturization of the control panel.

• Realized opening and closing ability with one pole 6 A slim shape.

• Micro load products for one pole 50 mA using Au-plated contacts for small load switching also available.

• Since G2RV is a transparent case, confirming the state of the contact with the naked eye is possible, and easy to confirm abnormality on-site (installed location).

• M18, short barrel, shielded sensor
• Cylindrical, metric threaded, brass housing
• Sensing distance is 8mm
• PNP output
• Operating mode is normally open (NO)
• Power supply voltage range from 10VDC to 30VDC, operating temperature range from -25°C to 70°C
• Yellow LED 360 degree indication
• Insulation resistance is 50Mohm min at 500VDC, dielectric strength is 1000VAC at 50/60Hz
• Approved by IEC60529, EN60947-5-2 standards, water resistance IP67

• M18, short barrel, shielded sensor
• Cylindrical, metric threaded, brass housing
• Sensing distance is 4mm
• Operating mode is normally open (NO)
• Power supply voltage range from 10VDC to 30VDC, operating temperature range from -25°C to 70°C
• Yellow LED 360 degree indication
• Insulation resistance is 50Mohm min at 500VDC, dielectric strength is 1000VAC at 50/60Hz
• Approved by IEC60529, EN60947-5-2 standards, water resistance IP67

• Realized opening and closing ability with one pole 6 A slim shape.

• Micro load products for one pole 50 mA using Au-plated contacts for small load switching also available.

• Since G2RV is a transparent case, confirming the state of the contact with the naked eye is possible, and easy to confirm abnormality on-site (installed location).

Long sensing distance of 30 m for Through-beam Models, 4 m for Retro-reflective Models, and 1 m for Diffuse-reflective Models.

Mechanical axis and optical axis offset of less than ±2.5° simplifies optical axis adjustment.

High stability with unique algorithm that prevents interference of external light.

Visible LED light for easy alignment.
Bright LED indicators for the easy operational status checking.
Flush mounting option for smooth installation.

Long sensing distance of 30 m for Through-beam Models, 4 m for Retro-reflective Models, and 1 m for Diffuse-reflective Models.

Mechanical axis and optical axis offset of less than ±2.5° simplifies optical axis adjustment.

High stability with unique algorithm that prevents interference of external light.

Visible LED light for easy alignment.
Bright LED indicators for the easy operational status checking.
Flush mounting option for smooth installation.

Visible LED light for easy alignment.
Bright LED indicators for the easy operational status checking.
Flush mounting option for smooth installation.